Woodworking Glue Spreader for Spreading Beech Plywood Veneer
Our factory produce the whole sets Plywood Machine, include plywood hot press machine, plywood cold press machine, glue spreader, plywood veneer paving line, plywood edge cutting saw, sanding machine and others.
Glue spreader's function mainly coating glue on both sides of plywood veneer, then workers paving them into plywood size.
glue spreader has 4feet and 8feet or customized according to your needs.
Gluing machine is also called plywood glue spreader. A mechanical device used to apply glue to the surface of veneer. The performance of the gluing machine not only affects the gluing quality of the veneer, but also determines the amount of glue used and affects the production cost of the plywood. Therefore, the roller type glue machine has the following technical requirements.
1) Improve the uniformity of glue coating on the entire format of the veneer. Specific measures are as follows:
(2) Ensure the manufacturing and installation accuracy of parts and components of the gluing machine. For example, to ensure that the working surface of the rubber roller and the extrusion roller is all runout to the axis, the parallelism of the upper and lower rubber roller, the parallelism of the extrusion roller and the rubber roller, etc.
(3) Appropriately increase the diameter of the rubber roller.
(4) According to the different types of rubber, the rubber coated by the roller is coated with different hardness, and the grooves on the surface of the roller are of different shapes and sizes.
(5) In order to adapt to the veneer of different thickness, the spacing of the upper and lower cots should be adjustable, and the thickness of the rubber layer should be easy to control and adjust. The thickness of the rubber layer is mainly determined by the gap between the extrusion roller and the rubber roller. The adjustment accuracy of the gap should be controlled at about 0.01mm, and the amount of glue is usually controlled within the range of 105-430g /m.
(6) Improve the wear resistance and rust resistance of the parts of the glue machine, set up the necessary safety protection devices, in order to improve the life of the glue machine and ensure safe operation.
The four-roll gluing machine is to add an extruding roller beside the upper and lower gluing rollers to control the gluing amount on the upper and lower surfaces of the single board respectively. The linear speed of the extrusion roller is 15%~20% lower than that of the coating roller, which plays the role of scraping, and the gap between the extrusion roller and the coating roller is adjustable to ensure that the thickness of the upper and lower rubber layer is uniform. The upper and lower rubber rollers provide glue at the same time, non-interference, glue is not easy to produce beating, is a widely used glue equipment.
There are two kinds of arrangement for the extrusion roller of the four - roll applicator. 1) The upper and lower extruded rubber rollers are arranged on both sides of the rubber rollers respectively, and the rubber pump provides glue through the rubber hose respectively; 2) The upper and lower extruding rollers are located at the feeding side of the rubber applicator. The upper rubber applicator is supplied by the rubber pump, and the lower rubber applicator is supplied by the lower rubber groove. Due to the different arrangement of the roller and the way to supply glue, its role is also different. The former coating uniform, can save glue material; The latter applies when productivity is relatively high. >>>>GLUE SPREADER MACHINE: | Product name | glue spreader |
| Sides | Double sides at the same time |
| Size | 4feet or customize |
| Diameter of coating roller | φ245mm |
| Line speed | 20-30m/min |
| Installed capacity | 3kw |
| Transmission way | gear &chain transmission |
| Size | 2250*1250*1700mm |
>>>>ADVANTAGES:
<1> Glue spreader's structure is simple, easy operate.
<2> Transmission by gear & chain, fast speed, high efficiency.
<3> Using good and big diameter roller, good quality
>>>>DELIVERY:
>>>>ABOUT US:
We-Shandong MINGHUNG Wood Machinery is one of the leaders of plywood machine in China, supplies a complete range of machinery, systems and technology for the production of plywood and veneer including wood debarker, veneer peeling machine, vacuum veneer stacker, knife grinder, veneer dryer machine, glue spreader, cold press, hot press machine, plywood saw machine, sanding machine.
Highly qualified personnel and competent management take all the advantages of production and continue developing day by day, the basis of our business is focus on our clients' needs, such position allows us to build long-term partnership with our clients in China and abroad.
We also works closely with a global network of manufacturing partners in order of provide the reliable, good quality and service to our customers.
>>>>OUR CLINETS:
With our clients, we are not just partners, we are friends.
We will always stand their position think about the problems, help you save cost and create much value.
>>>>RELATED MACHINE:
