01 PRODUCT DESCRIPTION
>>INTRODUCTION: The glue system used in particle board manufacturing is critical to the quality, strength, and durability of the final product. The adhesive binds the wood particles together, ensuring structural integrity and stability. The choice of adhesive affects not only the mechanical properties of the particle board but also its resistance to moisture, heat, and other environmental factors.
>>WORK PRINCIPLE: The application of the glue involves mixing it with wood particles in a blender, followed by forming the mixture into mats. These mats are then subjected to heat and pressure in a hot press, where the adhesive cures and bonds the particles together. The curing process is critical, as it affects the fin
al strength and stability of the particle board.
>>FEATURES:
1. Uniform mixing: Each wood particle should be thoroughly coated with adhesive to ensure optimal bonding during the pressing process.
2. Adjustable adhesive: Accurate dosing systems to ensure the correct amount of adhesive is used, minimizing waste and ensuring cost efficiency.
3. Easy clean and maintenance: It will minimize adhesive residue build-up to maintain efficiency and hygiene standards.
02 PRODUCT DISPLAY
03 OTHER MACHINE for OSB MDF HDF PARTICLEBOARD CHIPBOARD LINE
 |  |
| Drum chipper for crushing wood and barks and trunks into the certaine size chips. | Vibrating screen for screening big wood strands, suitable strands, and chips. |
 |  |
| Drying machine for drying the wet wood strands | Forming line for uniform distribution of the flakes both lengthwise and crosswise as well as the layer formation of top and middle layer flakes over the cross section of the panel |
 |  |
| Continuous press machine for pre-press particleboard, and make it in a certaine initial strength | Hot press for press particleboard in a high pressure and heating temperature |
 |  |
| Trimming machine: Used to trim and edge the chipboard after hot pressing, to remove possible unevenness and excess adhesive, and to make the surface of the board flat. | Sanding machine for sanding particleboard surface, and make its surface smooth and thickness accurate |
04 PACKAGING
05 COMPANY PROFILE
With many years production experience, advanced and mature production technology, experienced workers and engineers, professional technicians, our particle board production line has been very famous and high quality. From the beginning, materials and parts choice, to the end machine production finished, each production step by monitor by professional engineers, to make sure it is good and correct.
We are manufacturer and supplier of the full particle board production line + OSB production line + MDF production line, Located in beautiful Linyi city, Shandong Province, China.
The full production line like the wood chipper, wood flaker, screening device, glue blander, drum dryer, mat forming machine, continuous hot press machine, cooling device, sanding machine, cutting machine, our factory can offer to you.
Also if this is new business for you, we can help you make factory layout according to your own conditions.
We are always on the way to become better and better, make our machines better and better, we not pursue low price, we only pursue high quality, which can satisfy our clients requires, and help them produce good quality panel board, help them create much more value and benefits.
06 FAQ
<1> What is the Production time?
2 months after receive your deposit
<2> What is the Payment terms?
T/T. 30% as deposit, the left payment before loading.
<3> Warranty?
2 years
<4> Installation?
If you want, we can arrange our engineers go to guide install
<5> After sales service?
When you meet problem, contact us at the first time. we will help you solve quickly
07 WHAT WE OFFER?
If this is new business for you, we can help you make factory layout according your own condition,
If you are interested in our machine, feel free contact us.
——Shandong Minghung Wood Machinery CO.,LTD
